High Precision Dual Band USB Based GPS Mouse GNSS Receiver,NaviC Constellation Supported
HCG8040 GMOUSE is a product launched by HoneyComm IoT based on Cynosure iii GNSS engine’s dual-band multi-mode sub-meter accuracy, low power consumption, and integrated antenna module GMOSUE.
Overview
HCG8040 GMOUSE is a product launched by HoneyComm IoT based on Cynosure iii GNSS engine’s dual-band multi-mode sub-meter accuracy, low power consumption, and integrated antenna module GMOSUE.
The GMOSUE supports BDS B1i,B1c,B2a;GPS L1, L5 multi-band signals, including Beidou-3 satellite , and support all global civil navigation satellite systems supporting GPS, BEIDOU, GLONASS, GALILEO,IRNSS, QZSS as well as satellite augmentation systems SBAS (WAAS, EGNOS, GAGAN,
MSAS), provides high-precision, high-sensitivity, low-power positioning and navigation solutions for the manufacturing of vehicle-mounted and ship-mounted navigation terminal products.
Highlights of USB GPS Receiver
✔ Integrated antenna module, waterproof housing, very easy to install
✔ Supports all civil navigation satellite systems and Beidou-3 satellite signal system ( B1c, B2a )
✔ Receive L1 and L5 dual-band multi-mode signals at the same time
✔ Significantly improves satellite positioning accuracy to sub-meter level, and the excellent anti-multipath interference function improves positioning accuracy in urban canyons.
✔ Support Indian single IRNSS mode
✔ Support RTD differential mode
✔ High precision and high integration, simple peripheral application circuit
Main Performance
|
GNSS engine |
Cynosure III GNSS engine
Total 136 channels & DSP accelerator |
|
|
GNSS support frequency |
GPS/QZSS: L1 C/A, L5 | |
| BDS: B1C, B1I, B2a | ||
| GLONASS: | ||
| Galileo: E1, E5 | ||
| IRNSS : L5 ( special version) | ||
| SBAS: WAAS, EGNOS, MSAS, GAGAN, SDCM | ||
| refresh rate | GNSS | Maximum 10Hz |
|
Time to fix1 ( TTFF) |
Hot start | 1 sec |
| Cold start | 28 secs | |
|
Positioning accuracy 2 |
GNSS | 2.5m CEP |
| SBAS | 2.0m CEP | |
| D-GNSS | <1.0m CEP | |
|
Speed measurement accuracy & Timing accuracy 3 |
GNSS | 0.1m/s CEP |
| SBAS | 0.05 m/s | |
| D-GNSS | 0.05 m/s | |
| 1PPS | 20 ns | |
|
Sensitivity 4 |
Cold start | -148dBm |
| Hot start | -158dBm | |
| Reacquisition | -160dBm | |
| Tracking & navigation | -167dBm | |
| data protocol | NMEA 0183 4.0/4.1 / Cynosure GNSS private protocol | |
| Data interface | UART /USB/ RS232/RS485 | |
| speed limit | Velocity | 515m/s |
|
Power consumption |
GPS+QZSS | 22mA |
| GNSS L1+L5 | 36mA | |
| sleep mode | 12uA | |
| height limit | Altitude | 18,000m |
| temperature range/ | Working: -40 ° ~85 ° Storage -40 ° ~85 ° | |
| Standards compliant | ROHS | |
Note 1 , the number of available satellites is greater than 6 , the signal strength of all satellites is not less than -130dBm ; 2 , CEP, 50% , the number of satellites is greater than 8 pellets, 24 Hourly static positioning, The signal strength of all satellites is not less than -130dBm ; 3. Use an external LNA with good performance test.
Application scenarios
✔ PDAs, Pocket PCs and other portable devices
✔ Personal positioning and vehicle navigation, positioning and other trajectory tracking products
✔ Surveying and mapping products such as area measurement and distance measurement
✔ Synchronize UTC time and timing fields
✔ Track recording and GPS data point calibration
✔ Maritime aircraft, drones and other asset management products
Hardware Interfaces Options
Interface 1: MX3.0mm , small 5557 male end /43025 male end, connected to the plug
| Pin No. |
Pin name |
I/O |
Description |
Remark |
| 1 | RX | I | RS232 Serial Data Input | Leave open if not used |
| 2 | GND | G | GND | |
| 3 | TX | O | RS232 Serial Data Output | |
|
4 |
VCC |
I |
Module Power Supply |
3.3V-5V |
Interface 2: USB2.0 interface, 90-degree elbow
